Sunday, April 24, 2011

Journey of the Boardwalk: Part 7 (Handlepost & Handlebar)

Just got back from Desaru! It was a great trip, with lots of fun and good food along the way. The slopes were challenging to some of us, but everyone managed to conquer the slopes eventually!

It was also the first time I have really tested the new handlepost which I got for my Boardwalk. Previously, I had only tried it on shorter rides such as the one at Punggol. I am pleased to say that this handlepost feels stiffer and stronger than the original adjustable one, especially when climbing hills and coasting down slopes.

You can see from the picture below that the black fixed length handlepost is about 3cm longer than the length which I usually set my adjustable handlepost. Overall, the fixed height handlepost is 42cm from the top of the clamp to the bottom of the part that fixes to the frame. Because it is 1-piece, this means that there will not a a problem with the top part of the handlepost rotating with respect to the lower portion. Also, because there is no joint in the middle, it also flexes much less when it is pulled. Crucially, this handlepost also folds inwards for compact folding. The outward folding kind would be shorter and even stiffer, but because it folds outwards, it makes the folded package significantly wider and harder to carry or store.

Weight weenie info: Stock handlepost is 790g, Mu Uno handlepost is 660g.

To match the handlepost, of course I have to get a matching handlebar! Took the chance to upgrade the handlebar, and decided to get a lightweight ControlTech Scandium Handlebar. Point to take note is to find a handlebar with a diameter of 25.4mm, so as to be compatible with the handlepost clamp. Road bars are usually 26mm, while MTB bars are 31.8mm or 25.4mm.

Differences between the stock handlebar and the new handlebar:
1) New handlebar is 560mm, slightly shorter than the stock 580mm.
2) New handlebar has a gentler rise/sweep back of 6 degrees, compared with the stock handlebar's 9 degrees rise.
3) New handlebar weighs 130g, half the weight of the stock handlebar's 260g!

Look at the difference in tube thickness! The walls of the scandium handlebar may look very thin, but it is really strong and stiff. A carbon handlepost will weigh even less, at maybe 110g. But carbon can fail suddenly, and it can easily be damaged if the bike falls on its side. It can also be crushed by clamps or barends if they are overtightened. It would also cost double for a carbon handlebar.

Super strong, super light!

One thing not so good about this new handlepost/handlebar set up is that the things on the handlebar need to be rearranged. For example, the bell has to be shifted to the right hand side, or else it will get in the way when folding. The longer handlepost also puts the handlebar closer to the magnet, which barely clears the handlebar when folding. As seen in the pictures, you basically can't put much on the left side of the handlebar.

Initially wanted to write a review about the Biologic Air Horn, but decided not to after I found myself using it less and less. It is not required, but is just a good thing to have. On my rides I usually find myself using the horn at least once, such as when a car cuts across my path, or other situations where you want to make your presence known. But I find it quite troublesome to fix or remove the horn for folding, even though I made a removable clamp for the air bottle.

Me and my Barang-Barang. Thanks Taiwoon for the great pic!

16 comments:

  1. Hi,

    Great job on zhng-ing your bike!

    Where did you get the uno handlepost?

    ReplyDelete
  2. Hi I actually got it online from a China website. I do have a similar spare handlepost for sale, but in silver colour.

    ReplyDelete
    Replies
    1. tylsteve, do you still have the silver handle post available? Or do you have the website I can purchase it?

      Delete
    2. No it has been sold. try taobao. com

      Delete
  3. May I ask for the mounting of such flat bar with slight rise, should the bend actually be horizontally face the rider, vertically pointing upward, or 45 degree?

    ReplyDelete
  4. the handlebar's curve should be horizontal, back towards the rider. this sweep back is to make it more comfortable for the wrists.

    ReplyDelete
  5. Hi, can you share the website where you got the handlepost? Thanks!

    ReplyDelete
  6. hi steve. i would like to ask. if my bike currently uses a radius v handlepost, can i use the older radius handlepost to replace it?

    ReplyDelete
    Replies
    1. I think the mounting is quite similar, but no guarantees though.

      Delete
  7. Hi steve

    I have given below, you will see the website link Akinde product malfunctioned.

    Let the hunt for new products. Compatible parts you have shown above is the wonder?

    Bicycle Eco C6 Steel squad. In addition to steel, aluminum front fork squad fit?


    http://en.hollandbikeshop.com/buying-bicycle/dahon-folding-bicycle/dahon-parts/dahon-stem-steel-silver-cone-clamp-basic-exc-from-mod-08/

    ReplyDelete
    Replies
    1. I'm not sure if this one fits, as I am not familiar with the construction of the Eco C6 handlepost

      Delete
  8. Hi Steve

    I have fitted the Ergon GP4 grip onto my Dahon mu p9 stock handlebar.
    it seems like its a little too wide for my liking. Can you advise what is the normal width of the handlebar before I shorten it?

    Thanks

    ReplyDelete
    Replies
    1. The width of the stock handlebar is usually 560 to 580mm long.

      Delete
  9. Where did you get the ControlTech Scandium Handlebar?

    ReplyDelete
    Replies
    1. This was bought online some years back, from Chainreactioncycles.

      Delete

Every comment is moderated before publishing due to spam bots. If you don't see your comment yet, it is likely that it is currently being reviewed. Thank you for your patience!