Friday, September 21, 2018

Dahon MuSP: Final Assembly

Finally, after much effort, plus trial and error, the Dahon MuSP has been completed! This is a folding bike with 451 wheels, drop bar and caliper brake setup, 1x11 speed drivetrain with Di2 shifting, and internal cable routing. Let's take a look at the final product!

Drop bar setup, with Ultegra Di2 shifters

Bar end type Di2 Junction A for a neat appearance

Controltech stem used to mount the FSA Vero compact drop bar on the Fnhon T-shaped handlepost

During folding, the rear brake outer casing will be scratched by the hole edges of the frame. This is quite a serious problem as the metal coil can be seen...

Di2 battery located behind the seat tube. The Di2 wire runs from the battery mount to Junction B (hidden inside frame), together with the rear brake cable through the same hole in the frame.

Top view of the battery location, which is hidden between the seat stays.

Di2 wire to the rear derailleur exits from the right side seat stay.

Blue Wheelsport Smart 1.0 451 wheelset, with Panaracer Minits Lite tires

Ultegra R8000 road caliper brakes, which fits on this bike without any modification or adapter required!

Ultegra 1x11 speed drivetrain

Wolf Tooth 46T chainring, mounted on the Ultegra R8000 crankset

Left crankarm of the Ultegra R8000 crankset

Blue Wheelsport hubs, which have a different shade of blue from the rims. Lightweight titanium quick release axles.

Another view of the Ultegra Di2 R8050 rear derailleur, and the 11-30T cassette


Stock lightweight kickstand from the Dahon MuSP, which only weighs 158 grams. Optional but very useful to have!

View of the completed bike from the non-drive side

View of the bike from the drive side. Blue accents on the frame makes it more special!

Full specifications of this Dahon MuSP. Weight without pedals and kickstand (usual standard for comparing weight with other bikes) is about 9.1kg.

Comparing the weight of this bike to a few other bikes which I have weighed, let's see where it stands. Flat handlebar and drop bar bikes cannot be compared directly, as the handlebar setup is different which makes a drop bar bike heavier than a flat handlebar bike. All weight comparisons are done without pedals, kickstand or any other accessories.

Flat Handlebar:
Dahon MuEX (1x11 speed Di2): 8.4kg
Crius AEV20 (1x11 speed): 9.1kg
Dahon Vitesse (2x10 speed): 10.5kg
Brompton M6R (2x3 speed): 11.9kg
Tyrell IVE (1x9 speed): 11.5kg

Drop Bar:
Dahon MuSP (1x11 speed Di2): 9.1kg
Dahon Boardwalk (2x11 speed Di2): 10.7kg (estimated)
Wheelsport Fantasy (2x11 speed Di2): 7.3kg
Java Freccia (1x11 speed): 6.4kg
Canyon Endurace (2x11 speed Di2): 7kg
Merida Scultura 5000 (2x11 speed Di2): 7.4kg
Merida Reacto 4000 (2x11 speed): 9kg
Avanti Inc 3 (1x11 speed Di2): 10.9kg

From this comparison, the 9.1kg weight of this Dahon MuSP is not too bad, as it is actually the second lightest folding bike, after the flat handlebar Dahon MuEX which is just 8.4kg. Non-folding bikes normally have a weight advantage as they don't need to strengthen the joints or have the folding mechanisms.

The handlepost used for this Dahon MuSP is still quite tall, despite getting one that is shorter (27cm) than the stock handlepost (31.5cm). There are handleposts that are even shorter (about 25cm), but they don't fit the requirement of a T-shaped, inward folding type.

As a result, the handlebar is still positioned relatively high, when compared to a road bike.

Dahon MuSP with the Controltech stem angled 45 degree upward/forward, which is the angle that I used when tesing this bike. Still a lot higher than the handlebar of the Canyon Endurace in the foreground.

As mentioned earlier, the main purpose of having the Controltech stem is to allow the handlebar to be placed BEHIND the handlepost, as it will be used for a smaller rider with a shorter reach. Therefore, let's see how it looks like when we actually rotate the stem to be behind the handlepost.

With the stem rotated to place the handlebar behind the handlepost, the handlebar is now lower as there is no vertical extension provided by the stem.

In this setup, the handlebar position looks to be just right for a shorter rider, as it is lower and further back.

This Dahon MuSP has finally been completed! I am happy with being able to install standard reach road caliper brakes on a folding bike, as it ensures good braking performance when paired with a road shifter. The internal cable routing is good because it makes the appearance much neater, especially with the bar end Di2 Junction A.

On the other hand, during folding and unfolding, the rear brake cable will slide through the hole on the frame, which causes it to be damaged by the sharp hole edge. This is a problem as the plastic layer on the outer casing will get scraped off easily, exposing the metal coil of the outer casing.

The solution is to minimize the folding of the bike, and also to carefully guide the outer casing through the hole during folding and unfolding. Not ideal, but it is the only way to deal with this issue. External cable routing would eliminate this issue, at the expense of a less tidy cable routing.

After testing this bike for an extended distance of 60+km, it is all ready to go. It is not for my own use, but I build every bike as if it is my own, ensuring that it is adjusted correctly and optimally. Yet another bike project has been completed!

16 comments:

  1. hi, do you think it'll be possible to use shimano 105 R7000 with a flat bar config?

    ReplyDelete
    Replies
    1. Yes no problem. You will need the 11 speed road flat handlebar shifter, SL-RS700.

      Delete
  2. Hi Steve, may I know where can I buy the kickstand for the Mu SP? I am in Singapore.

    ReplyDelete
  3. MyBikeShop might have it. Or Scootz bike shop.

    ReplyDelete
  4. Hi Steve, may I know where to buy the folding post for Dahon Mu SP? I need 37cm outward fold. But it seems a lot of places don't have. Thank you.

    ReplyDelete
    Replies
    1. Search for Fnhon or Elosix handlepost on Taobao. Problem is many times I placed order, but after that the seller reply no stock. So just got to try different sellers.

      Delete
  5. By the way is it possible to install a inward folding post instead of the outward folding one on the Dahon Mu SP?

    ReplyDelete
    Replies
    1. Yes I am using the inward folding type. However, since it has a drop bar, folding is a bit different.
      https://handsonbike.blogspot.com/2011/07/new-way-of-folding-your-dahon-bike.html

      Delete
    2. Oh so that means there is basically no issue changing the fold of the stem from outward to inward? I am not using dropbars btw.

      Delete
  6. Hi Steve May I know if it’s possible to switch the stem to inward fold instead of outward fold for the Mu SP? There are people selling only inward fold.

    ReplyDelete
  7. Oh so that means there is no issue to change the fold from outwards to inwards? I am not using dropbars.

    ReplyDelete
    Replies
    1. No problem either way. It just whether you want the handlebar to be inside or outside when it is folded.
      Inward folding will have more compact folded size, if you use a flat bar with not many accessories. However, if the handlebar does not fit neatly in between the frame during folding, then outward folding is required.

      Delete
    2. I see. Many thanks Steve!! That solves a lot of headache for me!!

      Delete
  8. Hi Steve, have you replaced the cable housing on mu sp before? Is it a tedious job? I just changed to dropbar and realised the stock cable housing is a bit short.

    ReplyDelete
    Replies
    1. It's tedious, as you can see I set it up from scratch.

      Delete

Every comment is moderated before publishing due to spam bots. If you don't see your comment yet, it is likely that it is currently being reviewed. Thank you for your patience!